珠海机械设计珠海职业培训班珠海职业学校

它山珠海职业学校是经政府批准成立的正规培训机构,珠海机械设计培训授课老师是在外资企业过年工作经验的工程管理人员,授课内容包括CAD工程图,Solidworks或PROE或UG三维设计,从草绘,建模,曲线,曲面,组装,爆炸图,工程图,动画,渲染全部课程。
以下是为美国沃尔玛开发的出口产品的产品规格书,因时间有限,暂未翻译,产品规格书是产品开发前对产品结构,功能,电气,用途,市场,认证的详细定义和要求,是一切设计和开发工作的源泉,做好产品规格书对于一个工程师来说是必须的。

1.1 Purpose

This specification, when supplemented with the related drawings, parts list and other quality requirements, defines the product.

1.2 Scope

Included in this specification are the requirements and test limits for the manufacture, agency approval, and performance testing of the products TR1278B.

1.3 Model Features Matrix

Feature Model
TR1278B
Electronic Toast Controls Yes (7 shade)
Extra Wide Slots (35mm) Yes
Self-Centering bread guides Yes
Extra Lift (20mm +/- 3mm) Yes
Toast Shade Control (marked with numbers) 1 Knob
Metal body No
Bagel Function Yes
Frozen Function Yes
Cancel Button Yes
LEDs No
Crumb Tray Yes, drop down
Power Cord Length About 24”
Plug Type Polarized
Unit Color Black with metal accents

2.0 Reference to Applicable Documents

The units shall comply with the following standards, specifications, test and inspection plans. In the event of conflicting requirements, the more stringent or severe criteria shall be applied.

For any document listed that has been superseded, the requirements of the new document will be adhered to. The specific requirements for all global standards are found in the respective standards themselves, except where more severe criteria are called out in this specification.

2.1 Underwriters Laboratories, Inc. (UL)

2.1.1 Electric Household Cooking and Food serving Appliances UL 1026
2.1.2 Determination of Sharpness of Edges on Equipment UL 1439
2.1.3 Attachment Plugs and Receptacles UL 498
2.1.4 Cord Sets and Power Supply Cords UL 817
2.1.5 Quick Connectors UL 310

2.2 Canadian Standards Association (only if model needs C-UL approval):

2.2.1 CSA C22.2 No. 0064

2.3 Other standards listed for specific tests in the body of this specification.
2.4 Applica Consumer Products Inc. safety procedures as defined in BEST Directives D1AM, D1AX, D3AN, D10, D3D, D3AF, D6N, D3AO and related.
2.5 Engineering drawings, latest revision.
2.6 Bill of Material (BOM), latest revision.
2.7 In process control plan (IPCP), latest revision.
2.8 Final audit plan (FAP), latest revision.
2.9 Date code per BEST Directive D1E.
2.10 Color match and gloss per Industrial Design (ID) specification.
2.11 Design qualification test plan (DQTP).
2.12 All UPC codes and 13 digit EAN codes will meet the requirements of BEST Directive D2J.

3.0 Product Features and Definitions

3.1 Definition of Terms

3.1.1 Safe

Implies that the product does not expose the user or bystander to any mechanical or electrical hazards. Before or after a normal or abnormal use, drop, or environmental test, the minimum requirement for “safe” is the completion of Leakage Current test per HHPE035, Dielectric Withstand test per HHPE036, and Sharp Edge test per HHPT001 with passing results.
Also, there must be no access to live parts as determined by the use of the UL articulated probe, or fire hazard as defined below. Upon completion of a life test, the requirements are the same with the exception of elimination of the Dielectric Withstand test.

3.1.2 Functional

Implies that the product meets the requirements of this specification.

3.1.3 Fire Hazard

Fire hazard is defined by the latest applicable safety standard. In addition, a product is considered to involve a risk of fire if there is any emission of flame or molten metal (other than drops of solder), or if the operation of the product results in molten or flaming material under, on, or in proximity to the product under test. The materials referenced are defined by the individual test.

3.1.4 Reliability

The probability of a product performing, without failure, a specified function under given conditions for a specified period of time. Reliability estimates, for the general population of a given product, are derived through the testing of production representative samples to specified consumer usage pattern during the qualification phase and verified on the sample basis during the production life cycle of the product. The standard reliability model for appliances is 90% reliability @ 70% confidence factor over 3-year operating life.

3.1.5 Normal Use

Using the product as intended, as defined in the Use and Care Manual, and as advertised.

3.1.6 Abnormal Use

Using the product outside of the definition of normal use and as defined in the documents referenced in this product specification.

3.2 General Requirements

3.2.1 Quality

The source product manufactured for Applica Consumer Products shall be manufactured under controlled conditions in accordance with the approved Manufacturing and Quality Inspection plans for the product as stipulated by the requirements outlined in the purchase order and Applica’s Quality Plan per Best Directive D3AF and implemented through the Supplier’s Quality Plan.

3.2.2 Change Control

当然,珠海职业学校也包括了英语等等课程。